Paineilmakäyttöinen kannusteline (max 18kg)

Robart Fork Pneumatic Retract Tail Wheel

This is a large scale retractable tailwheel with forked axle for the tailwheel and air cylinder. For use with planes upto 40 lbs.

FEATURES

• This Unit Comes Pre-Assembled with an Air Cylinder and Tailwheel Axle Attached
• Steerable with a Pull-Pull System Attached to the Rudder Servo

INCLUDES

• One Retractable Tailwheel w/Air Cylinder and Tailwheel Fork Axle
• One Instruction/Parts List Sheet

REQUIREMENTS

• Pressure Tubing to Reach from the Main Control Unit to the Air Ram
• One 2" Tailwheel
• Plastic Sleeved Pull-Pull Steel Steering Cables(Goes to Rudder Servo)
• Four #6-32 Mounting Screws
• Four #6-32 Blind Nuts
• Four 3/8" x 1/2" Maple Mounting Blocks
• Four Dowel Pins (Used to Mount Maple Mounting Blocks to Bulkhead)
• Epoxy

SPECIFICATIONS

• Retract Mounting Brace Height: 2-11/16" (68.5mm)
• Retract Mounting Brace Width: 2"
• Height from Axle Center to Bottom Retract Brace: 2-1/8" approx.
• Extended Length from Axle Center to Retract Brace Mount: 3-11/16"
• Retracted Length from Axle Center to Retract Brace Mount: 4-1/8"

COMMENTS

• On the Air Cylinder: Extend Fitting is Located Forward and the
• Retract Fitting is Located Aft.
• For the Offset Axle Version, use Robart 160LWC