Aeronaut Race Control 10A speed controller
Race-Control is a speed controller for a brushed motor. The speed controller can be used in boats up to 10A. Thanks to its compact size, it is also suitable for small boats with little space in the hull.
The controller is programmed forward-stop-reverse.
An XT60 connector is soldered to the battery connection, the motor is soldered directly to the mains cable.
The speed controller works with an optimal voltage range with 1-2S LiPo batteries or 6V lead cells. The BEC produces a maximum of 6V
Technical information:
Operating voltage: 3.4-8.4V
Max current: 10A
Dimensions: 26x23x9mm
Weight including cables and connector: 11g
Race Control 10
Race-Control is a controller for brushed motors. The controller can be used in our Boats up to a power of 10 A. Due to its compact size, it is also suitable for small models with little space in the fuselage. The controller is programmed for forward-stop-reverse. An XT-60 plug is soldered to the battery connection. The motor is soldered directly to the connection cable. It works in the optimal voltage range of 1-2S LiPo batteries or 6 V lead-acid batteries.
The BEC delivers a maximum of 6 V, but also works with lower operating voltages of the drive battery. Here the output of the BEC is approx. 0.3-0.4 V below the operating voltage (eg drive battery 4.8 V = BEC approx. 4.5V)
controller Race Control 10 Order no. 7003/80 operating voltage 3.4-8.4V Max current 10A BEC max. 6 years BEC current 0.5A dimensions approx. 26x23x9mm Weight with cable + plug approx. 11g
