Aero-Naut CAM-Carbon Z 16x8"
CAM-Carbon folding blade propellers have been popular for years.
The new Z propellers are optimized to fold even tighter around narrow frames.
Propeller pallets fit all existing propeller hubs that are designed for 8mm: pallets.
The optimal result is achieved by using the Z-spinner.
NOTE! folding propeller length determined using a 42mm center piece. When using a smaller or larger center piece, the length of the propeller changes accordingly.
CAM-Carbon Z 16x8"
CAMcarbon folding props have been the standard in electric flight for many years. Reason enough to develop this series further. The new Z propellers have been specially optimized for even tighter folding on narrow glider hulls. Even with box-shaped wooden hulls such as our Triple, Helios or Soleo models, the new shape of the CAMcarbon Z makes the blades much closer to the hull.
The blades fit all existing folding propeller systems that are intended to accept 8mm blade roots. This means that the propellers can easily be operated on our entire range of CN spinners and Precision spinners.
However, the optimal result is achieved in combination with the Z-spinners (CN). Depending on the fuselage, it can be folded in without an intermediate gap, which not only improves the look but also the aerodynamic performance.
The profile section has been optimized in the root area. A plastic reinforced with carbon fibers is used as the material.
The specified size of the folding propeller refers to the use of a 42mm middle piece. When using smaller or larger middle pieces, the diameter and the pitch change accordingly.
The operation of folding propellers is only permitted up to the specified maximum speed and in connection with a soft start of the motor. The maximum permissible speed can be found on the packaging of the folding propeller.
