Joysway Dragon Force 65 V8 PNP

Uusi päivitetty (8:s versio) Dragon Force 65 -purjevene. DragonForce 65 on kokenut merkittävän muutoksen, jonka tarkoituksena on nostaa laatu ja ulkonäkö isoveljensä DragonFlite 95:n asettamien korkeiden standardien tasolle, vaikuttamatta kuitenkaan aiempien versioiden kilpailukykyyn. Tämä on todella upea ja kilpailuvoittoinen vene - suoraan laatikosta.

Tekniset tiedot:

Pituus: 655 mm
Palkki: 116,5 mm
Telineen korkeus: 915 mm
Kokonaiskorkeus: 1338 mm
RTR:n paino (ilman akkuja): 1200 g
Purjeen pinta-ala (pääpurje): 1,5 mm: 1460 cm2
Purjeen pinta-ala (puomi): cm2 766 cm2
Purjeen pinta-ala (yht:) 2226 cm2
Runkomateriaali: Materiaali: Muotoiltu ABS, maalattu valkoiseksi ja kiinnitetyt tarrat.

Sisältyy:

Täysin maalattu puhallusvalettu ABS-runko
50 mikronin Mylar-kalvo kilpapurjeet, joissa on painetut virtausraidat ja logot.
Puristettu hiilikuitumasto ja puomiputket.
Suulakepuristettu alumiininen köli, jossa on sinkkiseoksesta valmistettu painolasti.
Metallinen digitaalinen peräsinservo ja nopea tehokas purjevinssi.
Näyttöteline

Lisäksi tarvitset:

Lähetin, vastaanotin ja paristot

Dragon Force 65 V8 Sailboat PNP w/o radio equipment

Name: Dragon Force 65 V8 Sailboat PNP w/o radio equipment
Brand: Joysway
SKU: JW8815V8PNP

SKU: JW8815V8PNP

€349.00

Quantity

The new updated (8:th version) Dragon Force 65 sailboat. The DragonForce 65 has undergone a major transformation to bring the quality and appearance up the high standard set by its bigger brother the DragonFlite 95, without affecting the competitiveness of previous versions. This truly is a stunning and race winning boat - straight out of the box!
Servo tray screws are replaced with flat head screws

Servo tray is modified with larger the mounting holes & secure the mounted plate with screws from top of servo tray.

New switch mounting plate - now sailors can replace the power switch from top of the servo tray, no more disassembly of the servo tray to replace the switch

Modified dimensions of the black hatch cover patch and battery cover patch

New molded rudder servo arm (reinforced)

Improved rudder metal arm, the hole which fit with clevis change from 2mm diameter to 1.9mm diameter, this change will make sure rudder well fitness, minimize the left and right clearance.

Two bearing change to 404 stainless steel material

Modified mast stub and mast joiner with tube at outer diameter of 4.97mm so to improve the fitness. The whole mast unit will have better curve under tension.

Mainsheet Bridle Plate modification - reinforced, thicker & stronger

Mast deck sliding plate, modified mold：Width from 19.3 to 19.8mm, stop mast deck plate sideways wobble by tighter fit with keel box top molding

Mast deck plate positioning nut, change the way to glue it in position well. Prevent nut drop out from keel box.

Screws, nuts, washers for the mast deck plate, screws for keel - all change to 316 stainless steel

Jib boom rear plug, changed design, cord can be thread through outside, easy for change the jib boom lifting cord

DF65 sails clew hook 0.6 change to 0.8mm

Main sail luff ring, increase the bend on the end to form more of a hook shape

Better quality forestay steel wire, Shorten the forestay wire length, use thinner copper clamp to clamping the top and bottom wire, prevent wire loop loose

All sail corners, change from one layer patch per side to two layers patches to reinforce

Change to better quality elasticated sheeting cord

Included is the new 2025 winch servo for more accurate sails control
Length: 655 mm

Beam: 116.5 mm

Rig Height: 915 mm

Overall Height: 1338 mm

RTR weight (no batteries): 1200 g

Sail Area (main sail): 1460 cm2

Sail Area (Jib): 766 cm2

Sail Area (Total): 2226 cm2

Hull material: Molded ABS with painted white finish and attached stickers
Fully painted blow molded ABS hull

50 micron Mylar film racing sails with printed flow stripes and logos

Extruded carbon fibre mast and boom tubes

Extruded aluminium keel with zinc alloy ballast bulb

Metal geared digital rudder servo and fast powerful sail winch

Display stand
Transmitter, receiver & batteries

No Reviews YetShare your thoughts. Be the first to leave a review.

Dragon Force 65 V8 Sailboat PNP w/o radio equipment

Joysway Dragon Force 65 Version 8 PNP

DF65-V8 Updated items:

Specifications:

Included items:

Items needed:

Related Products