Futaba T6K-V3 T-FHSStransmitter set with R3006SB receiver included.
The T6K is well suited for a beginner pilot or an experienced weekend pilot.
Versatile Futaba transmitter that has been updated to 8 channels.
Supports S.Bus and S.Bus2 and 30-model memory in the transmitter.
Features, e.g. Telemetry, audio out. Ready models for gliders and Quad copters.
You can find the user manualfrom here
Includes battery case for 4x AA batteries.
Optional Li-Fe 6.6V 1700-2100mAh or 5-cell NiMH battery
You can find the introductory video from here
Updated Version 3 offers 8 channels of control!
To get the most radio for your money, check out the new 6K — an easy-to-program flight system with versatile functions that include telemetry, S.Bus/S.Bus2 Compatibility and 30 model memory. With Version 3 updates, it's now a better value than ever. The NEW 6K is an 8-channel system with additional Telemetry functions, expanded multicopter flight modes and much more.
New in the T6K Version 3:- Two additional channels
- Flight condition's
- AIL DIFF
- Timer 2
- AIL to RUD MIX
- Channels 7/8 are used through the R3008SB receiver's S.BUS/S.BUS2 ports
- Allow for expansions or adding accessories
- Can be assigned to any of the four switches or VR dial
- Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer
- Expanded Flight Modes (Fly Mod) in multicopter programming
- Priority — toggle through five different values assigned to flight modes on an assigned channel
- Matrix — up to nine combinations using two, 3-position switches for controlling gimbals
- Vibration alerts with timer functions and Throttle Integrate
- SBS-01C current sensor and SBS-01V voltage sensor compatible The included R3008SB receiver has six standard PWM ports plus S.Bus and S.Bus2 ports. You can use S.Bus as the main link to your servos or a combination of the ports. The S.Bus2 port allows bi-directional communication with T-FHSS Futaba air transmitters and the use of a wide array of Telemetry sensors.
- Airplane, Helicopter, Glider and Multicopter programming
- S-FHSS/T-FHSS selectable
- Telemetry system (T-FHSS) with data speech (via earphones) function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer, current, capacity and voltage
- Built-in antenna (Full Range)
- S.Bus/S.Bus2 servo setting functions programmable through the transmitter
- Preset vibration alarms
- 30 model memories
- 8-character model/user naming
- Programmable mixes (3-normal, 1-curve) for airplanes, helicopters, gliders and multi-rotors
- Digital trims with variable step settings
- Adjustable stick length and tension
- Changeable switch/VR position and AUX channel function
- Throttle position warning
- Backlit 128x64 DOT LCD screen with adjustable display contrast
- Software updateable through the CIU-2 or CIU-3 interface units
- Screen Lock
- Earphone/S.Bus/Trainer jacks
- Assignable switches (three 3-position, one 2-position)
- Range Check
- Program navigation bay with jog dial, +/- pads and end pad
- Data reset
- Model copy
- Selectable model type
- Fail Safe
- End Points
- Trim/Trim Resets/Trim Steps
- Sub Trim
- Servo Reversing
- Parameter functions
- Servo monitor/Test
- Wireless model data transfer (to other T6K transmitters)
- Timer-System and Model (Up/Down/Down-Stop/THR Integrate) w/Vibration Alert
- Trainer system
- Power Saver
- Wing Type (5-wing, 2-tail)
- Throttle Cut
- Dual Rate/Expo
- Throttle Curve
- Idle down
- Gyro
- Aileron differential
- V-Tail
- Camber
- Air Brake
- Elevator-to-Flap mixing
- Flap-to-Elevator mixing
- Elevon mixing
- Wing Type (5-Wing, 2-Tail)
- Condition selection
- Dual Rate/Expo
- Motor switch
- Gyro
- Aileron Differential
- V-tail
- Butterfly mixing
- Trim mixing
- Elevator-to-Camber mixing
- Camber mixing
- Aileron-to-Camber mixing
- Swash type (6)
- Condition Select
- Throttle Cut
- Dual Rate/Expo
- Trim Offset
- Delay
- Gyro mixing
- Swash AFR
- Swash mixing
- Throttle Curve (5-point)
- Pitch Curve (5-point)
- Pitch-to-Rudder mixing
- Throttle Hold
- Hovering throttle
- Hovering pitch
- Flight Mode
- Center alarm
- Dual Rate/Expo
- Throttle Curve
- Throttle Delay
- Gyro
- English
- German
- French
- Spanish
- Italian
- Dutch
- Temperature sensor (loop): SBS-01T
- Temperature sensor (EP models): SBS-01TE
- Altitude sensor: SBS-01A
- RPM sensor magnet type: SBS-01RM
- RPM sensor optical type: SBS-01RO
- RPM sensor brushless motor type: SBS-01RB
- (Additionally the SBS-01V Telemetry sensor for external voltage can be used together with the optional R3008SB receiver)
- Type: 2-stick, T-FHSS/S-FHSS selectable
- Channels: 8 (channels 7/8 are used through the receiver S.BUS/S.BUS2 port)
- Power Supply: 4 "AA" cells; optional 6V NiMH or 6.6V LiFe batteries
- T-FHSS Air: R3006SB & R3008SB (Note, the R304SB, R304SB-E T-FHSS surface system receivers does not work with the T6K or T6K-V2)
- S-FHSS: R2008SB, R2006GS & R2106GF (No Telemetry functions)
The included R3006SB T-FHSS Air Receiver is S.BUS compatible and features Dual-Antenna Diversity - it also comes equipped to handle high voltage applications.
- T-FHSS Air 2.4G system
- Dual antenna diversity
- S.BUS, S.BUS2 system
- Power Requirement: 4.8 - 7.4V Batteries
- Battery F/S Voltage: It's set-up with the transmitter
- Size: 43.1 x 25 x 8.8 mm
- Weight: 8.5 g
