Hitec Multicharger X4 Micro SE

The ultimate charger for all indoor models of batteries, for mini quadrocopter, aircraft or helicopter.
Each of the models that are fired with the small single-cell lipos or LiHV batteries needs this charger.

The 4 independent charging outputs can be used individually. There are 4 different connector types available for directly connecting the batteries. Operation is intuitive and easy.
The charged capacity, the current and the voltage are shown on the display of the respective channel during the charging process.

Compared to the previous charger, the X4 Micro SE can easily be switched to the new LiHV cell technology, as these batteries have a final charge voltage of 4.35 volts.
The Digigeber has also been revised so that the charging current can be set more precisely. And lastly, the charging power per output was also increased and a maximum current of up to 1.2 amps can now be set.

For maximum safety, the X4 Micro SE offers short-circuit protection, overcharge protection, reverse polarity protection and DC input voltage protection.

Far away from any power socket, thanks to the supply possible with an external voltage source, e.g. a 3-cell or 4-cell LiPo battery, it can be used to charge many 1-cell lipos.

1x charger X4 Micro SE
1x power cable
1x 12V connection cable with
alligator clips 2x adapter cable Molex connector 1.25mm pin spacing
1x multilingual manual

Width : 94 mm
Height : 50 mm
Length : 130 mm
Weight : 0.245 kg
Input voltage: AC 100-240 V
Functions: Charging Battery
types: LiPo

Output in watts: 21
BID chip system: No.

Operating instructions