Kavan GO-1035MG servo

Name: Kavan GO-1035MG servo
Brand: Kavan
SKU: KAV20.1035MG

SKU: KAV20.1035MG

€86.00

Quantity

Toimitusaika noin 1-4 viikkoa

KAVAN GO-1035MG servo

Suuri vääntömomentti/nopea ohjelmoitava digitaalinen matalaprofiilinen harjaton 45g servo titaanivaihteistolla ja laajalla tulojännitealueella 4,8-8,4V, 2xBB, ihanteellinen F3A-lentokoneisiin, hotlinereihin, 40-500 koon 3D-heleihin jne.

Vääntömomentti 10,0kg. , nopeus 0,125 s/60° jännitteellä 4,8 V,

vääntömomentti 12,0 kg.cm, nopeus 0,11 s/60° 6,0 V:lla,

vääntömomentti 15,0 kg.cm, nopeus 0,09 s/60° jännitteellä 7,4 V,

vääntömomentti 16,0 kg.cm, nopeus 0,08 s/60° 8,4 V jännitteellä.

Alumiinikotelo täydelliseen jäähdytykseen suurella kuormituksella.

Hammastus 25T

Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).

Servo Neutral: Servo neutral (centre) position setting.

Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.

PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.

Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)

Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.

Reverse: Reverses the servo movement direction.

Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.

SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.

Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:

(a) Release: No fail-safe protection.

(b) Keep Position: Keeps the position corresponding to the last correct control signal.

(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.

Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).

Default: Restores the factory default setting of the connected servo.

Servo dimensions	Mini
Servo type	Digital
Thrust at 4.8V [kg∙cm]	10
Thrust at 6.0V [kg∙cm]	12
Thrust at 7.4V [kg∙cm]	15
Thrust at 8.4V [kg∙cm]	16
Speed at 4.8V [s/60st.]	0.125
Speed at 6.0V [s/60st.]	0.11
Speed at 7.4V [s/60st.]	0.09
Speed at 8.4V [s/60st.]	0.08
Servo gears	Titanium
Ball bearings	2×
High-voltage	Yes
Power supply [V]	4.8 - 8.4
Length [mm]	35.5
Width [mm]	15
Height [mm]	29.2
Weight [g]	45
Intended for	Aeroplanes,Helicopters

No Reviews YetShare your thoughts. Be the first to leave a review.

Kavan GO-1035MG servo

Info:

Programmable Functions

Specifications:

Related Products