KAVAN PRO CA Thick 20g
KAVAN PRO CA Paksu 20g
Premium paksu CA-liima, työaika 30-40 s, kiinteä liitos n. 90 s. Pakkaus: 20g pullo.
Huippulaatuinen luja paksu (syanoakrylaatti) liima malli- ja yleiskäyttöön. Toimitetaan pullossa, jossa on tukkeutumaton levityskärki.
Paksu, matalaviskoosinen pikaliima on ihanteellinen imukykyisten ja ei-imukykyisten materiaalien liimaamiseen, jotka tarttuvat hyvin toisiinsa. Liimaa puuta, useimpia muoveja, metalleja, kumia, lasia, keramiikkaa, korkkia, paperia.
Tyypillinen levitysmenetelmä: liima levitetään yhdelle kosketuspinnasta ja osat työnnetään välittömästi yhteen; jonkin verran suhteellisia asentoja on mahdollista säätää vähän aikaa ennen kuin liima kovettuu.
KAVAN PRO CA thick 20g
Premium thick CA glue, working time 30–40 s, firm connection in ca. 90 s. Packaging: 20g bottle.
Info:
Top-quality high-strength thick (cyanoacrylate) adhesive for model and general use. Supplied in a bottle with a clog-resistant application tip.
The thick, low-viscosity instant adhesive is ideal for bonding absorbent and non-absorbent materials that adhere well together. Bonds wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical application method: the adhesive is applied to one of the touching surfaces and the parts are immediately pushed together; some adjustment of the relative positions is possible for a short time before the adhesive cures.
Features:
- Colour: clear
- Viscosity: 800–1200 mPa.s
- Density: 1,04–1,06 g/cm³
- Optimum application temperature: 23 °C
- Curing time (depending on temperature and nature of materials to be bonded): e.g. nitrile rubber 4–7 s, stainless steel 15–25 s
- Full cure: 24 h
- Shear strength: 15–25 N/mm²
- Operating temperature range: -10 °C to +40 °C
- Max. temperature range: -40 °C to +85 °C
- Optimum gap width between bonded parts: zero
- The cured adhesive is soluble in: acetone, dimethylformamide, acetonitrile
Recommended activator/accelerator: KAV9977 KAVAN PRO activator CA spray 150mlRecommended adhesive/debonding agent: KAV9979 KAVAN CA adhesive 20g
Removing excess uncured adhesive: cloth or paper napkin moistened with acetone (if the bonded materials resist it).
Thinning the adhesive: if the instant adhesive thickens, this is a sign that it has already partially polymerised and lost its original properties - no "thinning" can bring it back. If you need a "thinner" instant glue, simply use a lower-viscosity type. The different types of KAVAN PRO instant adhesives can be mixed together to achieve optimum viscosity.
For use as a sealant, suitable fillers: microballoon filler KAV9980 KAVAN CA filler.
Suitable for bonding: softwood and hardwood, particleboard, plywood, metals, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres, many plastics (including EPP and EPO).
Not suitable for bonding: polystyrene foam, polyethylene, Teflon, silicone.
Storing: in a tightly closed container, in a cool, dry and dark place (at +2 °C to +10 °C). Do not expose to temperatures below +2 °C.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.
