Robbe Modellsport Monsun V2 ARF
Kompakti 3m T-peräsin liidokki laipoilla ja siivekkeillä.
Tekniset tiedot:
Kärkiväli: 3000mm
Pituus: 1480mm
Lentopaino: noin 2950g
Runko: hiilikuitu/lasikuitu
Siivet: Styroksi/lasikuitu/ Abachi viilupinta
The MONSUN V2 is the successor and the further development of the famous MONSUN. It is a thermal and all-round glider in the compact 3m class with 4-flap wing. The T-tail is hinged backlash-free with a directly installed servo.
The PNP version has servos already installed, electrical connector and original multilocks as wing locks.
The flight characteristics are very good-natured. The MONSUN V2 can be flown as a slow thermal glider or as an all-rounder.
The ready-covered wings are constructed of styro core, glass fiber layers, abachi planking and a carbon fiber reinforced spar. The ratio of weight and strength has been optimally achieved.
The MONSUN V2 is suitable for beginners, as well as for advanced model pilots.- two-part, ready Oracovered Styro/GfK/Abachi surface with CfK connection
- continuous sandwich spar (carbon-pine-carbon) for maximum bending stiffness
- built-in digital Robbe servos FS-277 with ball bearings and metal gearbox (PNP only)
- ready-made wiring of all servos with MPX 6-pin connectors between wing and fuselage (PNP only)
- ready ironed rudder flaps with mounted rudder horns
- painted GRP fuselage with built-in wooden formers and CfK reinforcements
- powerful Ro-Power Torque 3526 870 K/V outrunner, optimized for 4S (PNP only)
- large canopy for easy battery change and RC installation
- ready hinged rudder flaps
- prefabricated rudder linkages with linkage parts from German production
- pre-cut servo well and linkage covers
- anodized 38mm aluminum spinner with straight center section (PNP only)
- high-strength carbon fiber airscrew 12x8" (PNP only)
- modern, highly visible design
- Model Monsun V2 largely prefabricated
- painted GRP/CfK fuselage
- ready Oracover covered, Styro/GfK/Abachi wing
- ready Oracover covered, removable T-tail made of balsa
- small parts (control horns, linkages, clevises, ball heads, covers, etc.)
- Assembly instructions in German/English/French
Spannweite (mm): 3000 Fluggewicht ca. (g): 2950 Rec. engine: BL Outrunner Steuerung: H,S,Q,M,WK Hersteller: Robbe Modellsport Länge (mm): 1480 Rumpf: CFK/GFK Flächen: Styro/GFK/Abachi empf.Motor: Ro-Power Torque 3526-870kv Ausführung: PNP - PLUG N PLAY empf.Akku: 4S/4200mAh LiXX Profil: HQ 2,5/9 Flugerfahrung: Fortgeschritten Bauerfahrung: Anfänger Antriebsart: Elektro
