SCIROCCO S 3.75m PNP (Petrol)

The new Scirocco "S" is the slightly smaller and further developed version of our successful Scirocco model.
With its 3.75m wingspan it is a bit more compact and maneuverable, but is in no way inferior to its big brother. The Scirocco S is a high performance F5J model in modern GRP/CFRP shell construction with appropriate strength. Due to the dynamic flight characteristics, the model is suitable for almost any application. Whether in weak thermals or stronger winds, "SCIROCCO" always shows its good-natured and easily controllable side. The hand launch of the 3.75m model is no problem thanks to the low basic speed and can be performed safely by the pilot alone.
But also during faster and tighter aerobatics the Scirocco S unfolds its true temperament and masters the figures.
Despite its electric design, it is also being used more and more often on slopes.
The elaborate shapely design allows excellent attitude recognition. The wing connection from the center section to the outer surfaces is force-fitted and neatly done by CFRP square spar.
The model is available in two versions (ARF/PNP) and is largely pre-assembled in the PNP version. The motor, servos and wiring are pre-installed, reducing the build time to a minimum. In the ARF version, you have the option to use individual RC components as you see fit.

• more compact wingspan
• higher maneuverability
• continuous ailerons/flaps (no more bar)
• Installation of black interchangeable frames for the 6-pin connectors provided in mold
• separation groove for multilock system in mold

• Model SCIROCCO S in full GRP/CFRP construction, in mold multicolor painted
• CFK coving
• Ro-Power Torque 4356-600 installed
• Turbospinner 45mm installed
• Folding propeller 16x10" installed
• 4x FS 128 HV MG servos installed
• 2x FS 335 MG servos installed
• small material
• Assembly instructions in German/English/French

Manual ENG